Estes Delta Clipper #2067

Tubes used in this kit are non-standard. The specs. in the catalog
and on the box are INCORRECT! The specs say the Dia. is 1" however
the tubes measure 1.084". The sizes given here are taken directly
from the actual kit parts and have been taken with a dial caliper.

Q  Desc                     Stk Num Size                Other

1  Plastic Nose Cone        N/C     4.6"L Shoulder .7"L 1.034" Dia
                                    Has molded on tube adapter.

1  Body Tube(Main)          N/C     13.275"L 1.084"OD 1.034"ID .025"Wall

1  Body Tube(Upper Fin)     N/C     4.75"L 1.084"OD 1.034"ID .025"Wall
                                    3 Slots 1.675"L .093"W .7"From End

1  Body Tube(Lower Fin)     N/C     3.2"L 1.084"OD 1.034"ID .025"Wall
                                    3 Slots 1.675"L .093"W .75"From End

1  Engine Tube              BT-50   2.75"L
1  Engine Tube              BT-50   3 3/16"L

2  Tube Joiners             N/C     1"L 1.034"OD .990"ID .022"Wall
3  Centering Rings          N/C     .25"L 1.034"OD .990"ID .022"Wall 

1  Engine Block             EB-50   .25"L .950"OD .750"ID .1"Wall 
1  Engine Block             N/C     .25"L .950"OD .850"ID .050"Wall

1  Balsa Sheet              BFS-30  4"W 9"L 3/32"T

1  Streamer                         60"L 2"W            Orange Vinyl
1  Shock Cord                       24"L 1/8"W          Elastic

1  Decal                    37578   5"W 6.75"L          Yel/Blk on clear self stick