Centuri S.S.V. Scorpion #5307 Q Desc Stk Num Size Other 1 Plastic Nose Cone 72013 6.4" Long tip to shoulder with .6" Long insert (Found in Estes NC-56 Assortment) NOTE* Connector not included in Estes pack. Item can be fabricated or omitted by using a coupler and adding .9" to one of the forward tubes. 1 Plastic Connector Part of 72013 fits ST-13 / BT-56 Length end to end - 2.5" Length of exposed part - .9" Length of front insert - .6" Length of rear insert - 1" Surface Detail - Raised ridges at front & rear with 2 access hatch detail on oppisite sides. (see scan) 2 Plastic Nose Cone 72054 (In Estes NC-5 Assortment) 2 Plastic Nose Cone 72051 (In Estes NC-5 Assortment) 2 Body Tube ST-5 / BT-5 2.5" Long 1 Body Tube ST-7 / BT-20 3" Long 1 Body Tube ST-13 / BT-56 6.25" Long 1 Body Tube ST-13 / BT-56 7" Long 1 Body Tube ST-13 / BT-56 8" Long 1 Body Tube ST-20 5" Long 1 Display stand tube N/C 6"L 1/16"T wall 1/2" Dowel works 1 Engine Casing Used Engine 1 Launch Lug .25" Long 5/16" Dia. 1 Launch Lug 7/32"Dia x 8"L 2 Wood Dowel .088"Dia x 12"L 1/12" Very Close 1 Coupler HTC-13 1.5"L 1 Thrust Ring TR-7 .4"L 3 Thrust Ring TR-7 3/16"L (Estes engine block) 1 Engine Lock EL-1 Tape Disk(8) 1/2" 1 Fiber Diecut Display Base .055"T Sheet Styrene works 1 Die-Cut Fiber Sheet 6.7"W 15"L .055"T 1/16 balsa works 1 Die-Cut Fiber Sheet 4.3"W 12.4"L .055"T 1/16 balsa works 1 Die-Cut Fiber Sheet 7.5"W 11.5"L 110 lb. Gloss card stock 1 Shock Cord 1/8"W x 38"L 2 Chute Pack CP-20 Parachute 20" Yel/Blk Shroud Line 128" Tape Disk(8) 1/2" 1 Decal 6" x 12.5" Red/Blu/Blk/Grn