Cloner Notes:
This kit is based on a Centuri tube ST-10 which is 1" OD. The closest equivalent Estes part is the BT-50 which is 0.976 OD.
The PNC-103 equivalent is the Estes PNC-50YR which is also 4.1" long. This is a very common cone used on many Estes kits.
The launch lugs are also common Estes parts.
The engine mount is standard Estes mount for BT-50. BT-20J, Engine hook, Engine block, and the 1" Centering ring. The 2 AR-2050 ring setup could also be used.
Recovery system is a standard parachute kit. I believe Centuri included a 12” canopy but I cannot verify the specs on-line. None of the descriptions list the size.
The missiles are made from Launch Lugs with plastic nose & tail parts. The nose is blunt and the tail has 4 small "sidewinder" type fins.
The Fuel Pods are made from BT-5 tube with plastic nose & tail parts. Estes parts #70305(used in kit #0801 Mosquito) and #72610(used in kit #3031 Star Trooper) could be used with the addition of 2 small fins.
The cockpit can be replicated from a cutout of the bottom of a 2 liter soda bottle. It'll be close but not exact. 

Parts List:
Nose Cone PNC-103 4.1" Exposed.
Nose Cone Insert 0.5" Shoulder
Body Tube ST-10 9-3/8" Long
Die-Cut Parts sheet 0.05" thick fiber card See Scan

Launch Lug #5928 2-1/4" long
Cockpit Clear Plastic, See detail pics
Decal Red, White, Blue, Yellow, Black Waterslide See Scan

Engine Tube ST-7 2-3/4" long
Centering Ring 1" long for ST-7 to ST-10
Thrust Ring #5966 for ST-7
Engine Lock #5980 for 18mm motor

Shock Cord 1/8" wide 18" long rubber
Parachute
Shroud Lines
Tape Discs
Shock Cord Mount

2 x Missile Tube #5928 2-1/4" long
2 x Missile Cone Clear Plastic, See detail pics
2 x Missile Tail Clear Plastic, See detail pics

2 x Pod Tube ST-5 1-1/4" long
2 x Pod Cone Clear Plastic, See detail pics
2 x Pod Tail Clear Plastic, See detail pics