Scissor Wing Transport Measurements.
Note: Many scanned items are a full 11" long, and will be 'shrunk' if printed to fit within margins!
Note Also: In 'est1265k.png', the 'Pod Brace' is there via cut & paste from the one in 'est1265j.png',
because it didn't show up via scan.  They are identical.

Only items without measurements on instructions parts list given.

Item P/N   Measurement   Description
------------------------------------
 F   85772  7"		  Elastic Thread, unstreached.  Approx. same diameter as Parachute thread, a little bigger.
 G   70266  Total len:4 5/8", shoulder len:3/8" Ogive BNC-50Y Nose Cone
 H   38178  2 5/16"       Launch Lugs
 I   85906  6"l x 1/8"d   Dowels
 J   32050  7/8"l x 1/4"d Dowel
 K   44060  Approx. 1/2" dia. rubber bands
 L   45117  5" x 5/8"     Adhesive backed paper, thin.
 M   84852  3" x 1 1/2"   Adhesive backed paper, heavier. (like a printer label)
 N   32277  1/8" thick 
		Rectangular cutout: 2 5/16" x 1"  Large Hole: 1/4", small hole: 1/8", large end is 1 1/6"
		Large disc: 1 5/8" Dia. Large hole: 1/4", small hole: 1/8"
		Medium Disc: 1" dia, hole: 1/4"
		Small Disc: 25/32" dia. (1/32 larger then 3/4"), hole: 1/4"
 O   32278  18" x 3" x 1/8" Balsa Sheet.  Contains main wing.
 P   32281  18" x 3" x 1/16" Balsa Sheet.  Contains Elevator, rudder, small parts.
 Q   37065  12 7/16" x 4" Decal Sheet.
 R   85562  12" widest dia. Hexagonal Parachute, yellow & black